K11 Owners Group

You might try the sidecar forum over at AdvRider.
http://www.advrider.com/forums/forumdisplay.php?f=56
Good Luck.

Thanks a bunch. BB

My tool kit has the shock wrench with the line on it for the k75, k100. I dont have the L shaped dipstick for the K11. Could someone measure theirs and let me know what the length is to the fill line. ...

Put some Baker Air Wings on it and took it out for a spin. WOW...what a difference. I highly recommend them! I noticed that they probably pull more heat up to your legs when closed, but should be nice ...

New switch and everything is back to normal...Brake light and ABS. Thanks for all that good help. Very Happy

Thanks Drake. I pulled the connector to the front brake switch and looped it......got power at the BMU....switch must be bad. It also let the brake monitor light flash.....should be on the way to fixe ...

Woahhhhhhhh, I'm pulling my hair out. I decided to track down one problem at a time. I'm trying to trace the problem with the hand brake light. I have 12v at the BMU gray/red wire only when I apply th ...

Thanks, I did some mods with the closed cell foam under and around glove boxes, knee pads etc. to get the hot air out the vents. I think its doing a good job of redirecting the air but havent had hot ...

The rear light monitor stays lit (solid) and the ABS light flashes. It never gets past that sequence. I believe the bulb sensor is the first check on the ABS circuit. Once it determines the front and ...

I thought that the brake light working was a part of the ABS system. The BMU is included in the ABS schematic. I typically get a front wheel sensor light on the ABS codes, and can clear it. I have a b ...

I'll check that out. Am I correct in assuming that the ABS is non functioning as long as the BMU is picking up the switch failure or......?

Rear brake light works (foot), but the front brake light is inop (hand). Is this more than likely a connector problem or a bulb monitoring device problem? I have the wiring diagram and am not sure whe ...

Thanks, that helps. I'll tear into it before too long and let you know how it works. BB

Thanks for the replys, looks like a number of different options that I need to consider. I would like to hear more about plugging the areas at or near the radio and glove box, and redirecting the fan ...

Thanks all. Have already done the johnny blanket mod, the fan switch mod, made my own wind wings attached to the crash bars (at the heads). By the way they help alot. Guess I'll just ride something el ...

Go ahead and piss all you want OTG. Thats what I'm after. Honest opinions accepted. By the way i did say I was considering selling.
I have 2 other BMW Airheads I ride most of the time, but the K11 ha ...

Wondering about going naked on a "93 LT. I've had enough heat to last a lifetime. I've done all the mods except 3 core radiator, and am thinking about selling or going naked. Any thoughts? Anyone ...

Thanks for the suggestions. All these mods are temporary till I find the ones that work. There is enough air movement with the crashbar vents that I will most likely remove those lower side covers. I' ...

I am posting this because I found an easy fix for solving the burning legs problem on my K11. I did the johnny blanket mod, and doubled it under the seat. Also did the fan switch. That solved the prob ...

Looking for a set of K-Guard Heat shields and a set of lower Baker wind wings for a '93 L11LT. Or does someone have photos of the K-Guards they would be willing to share so that I could fabricate some ...