K11 Owners Group

Mine is still ongoing.

Started over a year ago, going to adjust valves etc. on the 93 K1100RS with EML sidecar, to get ready for last spring.

While the cams were out had a heart attack. Several ...

A couple of years ago I finally found an LED H4 that works well in Ks. It's a good upgrade and even makes the crappy K75S headlight much better.

Which one are you using? I tried a couple different ...

Did you remove the rotor flange at the end of the crank shaft? That the plate and rotor cup attach to?

Nope, did not remove the rotor flange. I removed the front cover of the motor to access the ca ...

For various reasons the K1100RS sidecar rig has been sitting in pieces for several months. Finally started putting her back together. All the parts are bagged and each bag is labeled, however have thi ...

Also posted on BMW MOA site

Long story but here is the short version, several weeks ago started maintenance on the 1993 K1100RS. Checked valve clearances and ordered the required buckets (or whatev ...

I've had my 93 K1100rs since probably 1999, and am on my second Odyssey battery, first one lasted almost ten years, have at least 7 on the current one. The bike stays on a battery tender.

K75S is a sweet looking ride

Glad you're back, just keep on the meds.

It should adjust the reach to the brake lever.

If it's like mine it rotated randomly until I epoxied it in position

I usually just replace the gauges with VDOs

I did the same replaced fuel gauge and temp gauge + sender with VDO, no problems

What size tires are you running?

I'm running 195/50 x 16 car tires on all three wheels and using a speedohealer (https://www.healtech-electronics.com/products/sh/

air wick would be great

I'm good for one

We've used 1 800 HAUL BIKES twice (once buying and once selling) with good results

The bead seater is very particular on pressure, too much pressure blows the tire back off the rim.

sometimes less is more

When all else fails

http://www.northerntool.com/shop/tools/product_200451163_200451163

I've used mine on everything form golf cart tires to tractor tires

Thanks for the replies, I found the link on the motobrick site and tried the magnet fix. I put 1500 miles on the bike in the last 5 days and still have my sidecover. (Rode the brick to the Desmo Tim ...

While replacing the right side cover I managed to break the center mount ( sort of u shaped plastic that clips on the post on the frame.)

I tried a quick epoxy repair that didn't work.

Anyone ha ...

I tried an LED conversion on my RS, couldn't get the "bulb" in. The heat sink on the back interfered with the fairing mount. There looks to be clearance, if you could get it in.

For now ...

I think I have one, I just have to find it. When I changed the front end on my 93 K1100RS sidecar rig I removed all the ABS stuff.

Will let you know in a day or two if I locate it, there are sever ...