K11 Owners Group

I shall give all that a go first thing in the morning - i believe you may have it there...

many thanks!

HI folks,

I've tried to start my K1100R project bike up - I'm just about to re-register it as my commuter.

Electrics are fine, the dash lights up all good, the starter motor cranks over very nic ...

removal is complete, just waiting on new braided front lines (2-2).
The removed components weigh approx. 12 kg (25lbs?) - the pumps, lines, computer, sensors etc. I was able to re-rig the back line f ...

Thanks Flying Duck - I will be putting a wider bar on the K11R, probably a Renthal or similar (I need new front brake lines anyway) to complete the naked look, and there is no fairing up front, just a ...

Hi folks again - almost finished my project of converting my K1100RS into a K1100R.

Mirrors!

What size mirror stems fit into the handlebar mounts - I think the RHS is a 8mm thread, but the othe ...

Sorry - found out for myself, looking through old manuals etc. They are all 41.7mm forks!!!!

Cheers.

This is a K100RS 2v question, not K1100, but I thought some of you may know...

What diameter forks do the K100RS 2v machines use? Is it 41mm like the K1100/K1004V or same as the Airheads of the tim ...

many thanks - narrows down the selection of bars!

having just taken my K1100RS apart - and ridden the K1100LT, I think its no problem to fit the pockets - you would need new knee pad thingies (the rubber thick bits) and the brackets etc.

they are ...

hi folks - im replacing the bars on my K1100RS as i continue the path towards full nakedness.

Im thinking some Renthals or similar - can someone tell me the width of the standard bars? I'll use th ...

Ive decided to remove the ABS from my 93 K1100RS (naked) - save weight and get more feel from the front brake.

Also, Im putting a set of Renthal bars in for more upright position, so I need new fro ...

sorry i forgot to mention i want to keep the original and possibly revert back to pillion use later on

Hi folks, I need a pair of footpeg plates that i can convert to rider use only - i.e no pillion footpeg (either drilled out or filled in/welded) but that i can still use my panniers.

reason: im con ...

ok im an idiot - found the circlips, removed, lifted straight up and forward, no dramas.

yes, the fuel lines are a bit longer, which is handy.

so my K75 mustn't have had the clips as well.

t ...

Ive tried lifting straight up - theres a box with clips there (electrical box?) but it wont budge!

Hi folks - need to remove the tank to change the air filter and do a general clean up on my 93 K1100RS. I used to have a 87 K75S and the tank removal was a pinch, but this one seems different.

I ha ...

on my friends dads' K100 (modified) he lowered the forks in the triple clamp a bit and installed a higher shock in the rear (Honda CBR600 i believe) to improve the handling, which it has. makes turn i ...

oh the rest take no time at all - easy peasy.

ill go do the other disc first and then come back and try all 6 spring bobbins.

Im doing this job right now - bought the kit from my local BMW guy - $107 per disc OUCH!!!

anyway, having trouble putting the new spring bobbin pins in - should I use a little grease and/or try com ...