K11 Owners Group

Done:
Swapped the lock cylinder from the cracked to the new post.
The lock cylinder was a bit jammed due to a of road dust ( from gravel roads ;-(
Time to mount the post with lock to the pannier.

Thanks for your tips, will be carefull at drilling and if the drill jams or it will heat up the rivet close to risk for melting the plastic, I will use a dremel and grind it out.
Will also bear in mi ...

Great Thnx!

A note besides the subject of this thread: Expect to get a package with items from Motoworks by the end of next week incl. the lock post mentioned in this thread.
Presently on the des ...

Hi
Broke one of the Pannier to frame lock post last summer and need to replace it.
Found a new set at Motorworks http://www.motorworks.co.uk/vlive/Shop/Parts.php?T=5&NU=15&M=40&Ct=WA&a ...

Hi
Beeing a bit crazy can't resist trying to ride on snow / ice on K11LT after some seasons riding my K1100LT/SE on gravel with touring tires.
PS: We are allowed to ride / drive with spikes on publ ...

Tanks a lot
Will try it.

Found the timing poiint are 6 degrees BTDP.
ref. according to the offical workshop manual page 12.6, the igition timing are statically set 6 degrees before Top Dead Point "OT".

Removing ...

Problem solved.
Merging drivetrain and frame together this evening.

Hi

How to set the timing on K1100 ?
Merging two engines into one due to crashed bearing in the back of the engine with destroyed backend of the crankcase.
Have to move the hall pick up a.s.o. be ...

Advize you to remove the frame from the engine, not the engine from the frame. It's easier.

Did so see: http://www.flyingbrick.de/board/index.php?page=Thread&threadID=32115 .

From the ...

Hi
My -94 K11LT broke down while crossing the bridge from Denmark to Sweden with a load sound and blinking charge lamp.
Did some wrenching taking out the alternator and found out that the rotating ...

Hi
"Upgraded" my -94 K11LT with shock and springs from Wilbers. A mayore improvement in comfort and handling.
Replaced the original break lines with steel surface flexible break lines.
...

Hi

Had a bit of wrenching part replacing the starter free wheel unit of a -94 K11LT. Se: https://plus.google.com/photos/102903190849339634673/albums/5911953970918597729?authkey=CLHsoeKV5KnVSg

Th ...

Hi

Not sure I got the right name but a fellow rider has -94 K11LT foot pegs rear and would like to replace it with a plate like the option on K12LT.
Or to be able to adjust the rear pegs in verti ...

Hi

Got to the point where I took the K11 apart to mounth a new free wheel to the starter. Se: https://plus.google.com/photos/102903190849339634673/albums?banner=pwa&gpsrc=pwrd1#photos/102903190 ...

Go a winter/ gravel enthusiast arround the corner:
http://www.saarela.se/vinter/vintermc/vintercbr.html
that probably also have some advises.

Hi

As the LT seem to be not to bad on gravel, I'm consider getting a second set of rims and tires with a bit more GS use pattern.
Any tips:
BTW. it's for trips like [img]http://www.youtube.com/wa ...

Hi.

The LT are a genuine MPV from highways to gravel:

[img]https://picasaweb.google.com/102903190849339634673/GravelTour2011#5656566067717379730[/img]

Pls remove this topic.

Could aligning the direction / angle of the crossing in both end of the driveshaft influence lifetime ?

Thanks
Now I know what should have been removed.
No wounder why I didn't understand what the flapper was, it was missing on my bike as I bought it.