View previous topic :: View next topic |
Author |
Message |
Flying Duck PsyKotic Waterfowl
Joined: 27 Jan 2005 Posts: 10087 Location: Bumf***, WA
|
Posted: Tue Sep 22, 2009 3:49 pm Post subject: Magnecor Spark Plug Leads |
|
|
I just ordered some Magnecor spark plug leads for my K1100s.
I got the 8.5mm "Competition" wires for the RS because they're red.
I got the 8.0mm "Conventional" wires for the LT since they're blue.
Plan to install them in October.
http://www.magnecor.com/magnecor1/main.htm _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
Back to top |
|
|
goldust Brick Rider
Joined: 07 May 2007 Posts: 38 Location: Indianapolis, Indiana
|
Posted: Fri Sep 25, 2009 3:05 pm Post subject: |
|
|
I have been using the magnecor wires for about a year now.
They have performed very well.
When i put my lab scope on them, they have a better trace signal than the originals ever did. |
|
Back to top |
|
|
Flying Duck PsyKotic Waterfowl
Joined: 27 Jan 2005 Posts: 10087 Location: Bumf***, WA
|
Posted: Fri Sep 25, 2009 3:21 pm Post subject: |
|
|
goldust wrote: | I have been using the magnecor wires for about a year now.
They have performed very well.
When i put my lab scope on them, they have a better trace signal than the originals ever did. |
Which ones? _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
Back to top |
|
|
michaelcurrin Flying Brick Rider
Joined: 01 Jun 2003 Posts: 329 Location: eastern NC
|
Posted: Thu Oct 01, 2009 12:29 pm Post subject: |
|
|
Anybody else had trouble with that link, I haven't been able to get it to open.
It may just be this "government" computer
Mike _________________ Mike Currin
20 BMW R1250RS
93 BMW K1100RS / EML Speed 2000
06 Ducati ST3
67 Triumph 650 chopper |
|
Back to top |
|
|
John Clauss Flying Brick Rider
Joined: 04 Apr 2003 Posts: 730 Location: Robesonia, PA
|
Posted: Thu Oct 01, 2009 1:31 pm Post subject: |
|
|
michaelcurrin wrote: | Anybody else had trouble with that link, I haven't been able to get it to open.
It may just be this "government" computer
Mike |
Link works fine for me. _________________ 1997 K1100LT
1975 R75/6
It will bring you so close to nausea, it will make you sick! - Big Al |
|
Back to top |
|
|
blue95lt Flying Brick Rider
Joined: 21 Mar 2007 Posts: 230 Location: Franklin In.
|
Posted: Sun Oct 11, 2009 8:01 pm Post subject: New wires? |
|
|
Hey Duck, what do you do about the big metal "cap" on the spark plug end of these new farcles (wires)?
thanks keith |
|
Back to top |
|
|
Flying Duck PsyKotic Waterfowl
Joined: 27 Jan 2005 Posts: 10087 Location: Bumf***, WA
|
Posted: Sun Oct 11, 2009 8:42 pm Post subject: Re: New wires? |
|
|
blue95lt wrote: | Hey Duck, what do you do about the big metal "cap" on the spark plug end of these new farcles (wires)?
thanks keith |
I ordered them and left town before they arrived so I don't know what they actually look like.
Did you buy some? Got a pic? I'd be interested in seeing them. _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
Back to top |
|
|
blue95lt Flying Brick Rider
Joined: 21 Mar 2007 Posts: 230 Location: Franklin In.
|
Posted: Mon Oct 12, 2009 8:06 am Post subject: Just stock |
|
|
No Duck,
I just got stock wires fm bmw indy store.
Igot 2 at a time 2 different times 109 and change two times.
I'm not good at electric stuff so don't know if other makes will have the wire good enough to carry correct volts and resistance and stuff.
gotta work by,keith |
|
Back to top |
|
|
Jim Site Admin
Joined: 17 May 2003 Posts: 3841 Location: WHERETHEFUNNEVERENDS
|
Posted: Mon Oct 12, 2009 11:29 am Post subject: Re: Just stock |
|
|
blue95lt wrote: | No Duck,
I just got stock wires fm bmw indy store.
Igot 2 at a time 2 different times 109 and change two times.
I'm not good at electric stuff so don't know if other makes will have the wire good enough to carry correct volts and resistance and stuff.
gotta work by,keith |
Keith - not answering for Drake. Look at your original spark plug wires. If you got the right ones for your bike, they have "big metal caps" on them.
I'm sure that BMW hasn't changed the technology behind our spark plug wires - there are probably better wires available by now. _________________ Jim
1997 K1100LTSE 94,000 - has gremlins!
1995 R100RT Classic 16,650 crashed - repairing
1992 K75RTP 46,000
"We shall not all die, but we shall all be changed." |
|
Back to top |
|
|
Flying Duck PsyKotic Waterfowl
Joined: 27 Jan 2005 Posts: 10087 Location: Bumf***, WA
|
Posted: Mon Oct 12, 2009 1:07 pm Post subject: |
|
|
I can only imagine that these guys know what they're doing and if they're listing them specifically for the K1100 that they're the correct plug wires and will fit and work well.
I found lots of positive reviews (mostly on cars) surfing the Internet before I decided to purchase them.
I hope to get home and install them this week sometime. I'll post pics.
If they don't fit/work then I'll send them back. _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
Back to top |
|
|
blue95lt Flying Brick Rider
Joined: 21 Mar 2007 Posts: 230 Location: Franklin In.
|
Posted: Tue Oct 13, 2009 8:02 am Post subject: caps, Jim |
|
|
Yes jim I got caps on mine,but duck bought the other brand and I wanted to know if those had metal caps or was he going to use the old ones someway? thanks jim... keith |
|
Back to top |
|
|
Beachcomber Flying Brick Rider
Joined: 04 Nov 2008 Posts: 350 Location: Redditch UK and Reichenau [ Saxony ]
|
Posted: Mon Nov 09, 2009 5:55 am Post subject: |
|
|
Hi Guys,
Magnecor is one of two companies here in the UK, one is a satellite [ Magnecor ] and the other is English [all the parts are made here].
I have been liaising with both companies for some time now and have trialled products from both [ 10K miles on 2 x bikes ].
Both have performed well and without a hitch. Magnecor have an excellent reputation in Europe for their car leads and they seem anxious to please with this project.
The other company manufactures everything in house and are OEM suppliers to many automotive manufacturers. They have stock [ 8mm ] and hi-po wires [10mm ] and they are currently making up a "pre-production" set for me to try out.
I'll post the results. _________________ Beachcomber '93 K1100RS / '93 K1100LT and several K100's |
|
Back to top |
|
|
RAL88 Flying Brick Rider
Joined: 28 Apr 2004 Posts: 736 Location: New Mexico Land of Enchantment and 365 days of riding USA
|
Posted: Wed Dec 02, 2009 8:55 pm Post subject: |
|
|
I picked up a set of Magnecors 8mm and put them on the bike. I did not notice two much of a difference between those and what was on the bike in terms of performance but there wasn't really anything wrong with the old wires. The nice part is that you can easily get the wires on and off the plugs without the fear of pulling the bike down on top of you. Putting the wires on there is a nice audible click that tells you that they are set on the plug. _________________ Rich
"If it ain't broke, take it apart and make it work better"
*************
'96' K1100LT-SE
'97' R850GS-R |
|
Back to top |
|
|
Flying Duck PsyKotic Waterfowl
Joined: 27 Jan 2005 Posts: 10087 Location: Bumf***, WA
|
Posted: Sat Dec 05, 2009 2:56 pm Post subject: |
|
|
RAL88 wrote: | Putting the wires on there is a nice audible click that tells you that they are set on the plug. |
Boy, when I installed the Magnecors, it felt like they were a little loose at the cap even though I made sure to push them on straight. So much so that I called and chatted with their tech support who said that was OK. I've got about 4-500 mileson them on the RS now and they seem to be doing fine. _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
Back to top |
|
|
|