View previous topic :: View next topic |
Author |
Message |
ablackrat
Joined: 17 May 2011 Posts: 20 Location: United Kingdom
|
Posted: Thu Dec 12, 2013 7:13 pm Post subject: Back on the road again... |
|
|
After a full strip down to sort the clutch and gearbox I ended up doing a repaint and adding some lights and reflective material!
Just a few more bits to sort out and then I'll be happy...for a while. |
|
Back to top |
|
|
SugarHillCTD Site Admin
Joined: 10 Oct 2007 Posts: 4240 Location: Now in Eastern Pennsylvania
|
Posted: Fri Dec 13, 2013 7:09 am Post subject: |
|
|
Nicely done.
I like the reflective material and the lights.
Just a bit more difficult for a smidsy.
John _________________ John & Cathy
'92 K100RS4V Pearl White SOLD
'04 K1200GT
IBA Several-SS1k, BBG, 50CC NYC to S.F. |
|
Back to top |
|
|
whyoldbill Flying Brick Rider
Joined: 12 Jun 2006 Posts: 440 Location: in the boonies, northwest of Columbus, Ohio
|
Posted: Sun Dec 15, 2013 8:40 am Post subject: |
|
|
[Duplicate post deleted] _________________ '02 - GL1800
The desired effect is what you get when you improve your interplanetary funksmanship - George Clinton
Last edited by whyoldbill on Mon Dec 16, 2013 2:22 pm; edited 1 time in total |
|
Back to top |
|
|
whyoldbill Flying Brick Rider
Joined: 12 Jun 2006 Posts: 440 Location: in the boonies, northwest of Columbus, Ohio
|
Posted: Sun Dec 15, 2013 8:41 am Post subject: |
|
|
Very nicely done!
If you don't mind my asking, is that some sort of reflective tape over the paint or special paint or what?
Congrats! _________________ '02 - GL1800
The desired effect is what you get when you improve your interplanetary funksmanship - George Clinton |
|
Back to top |
|
|
ablackrat
Joined: 17 May 2011 Posts: 20 Location: United Kingdom
|
Posted: Sun Dec 15, 2013 12:44 pm Post subject: |
|
|
The material is a retro reflective product from 3M. I can find the exact produce code if you're interested. I had them done by a local company that does our job bikes and still had the design from when we had K1100. The company is http://www.bluelite.co.uk/ |
|
Back to top |
|
|
whyoldbill Flying Brick Rider
Joined: 12 Jun 2006 Posts: 440 Location: in the boonies, northwest of Columbus, Ohio
|
Posted: Mon Dec 16, 2013 2:43 pm Post subject: |
|
|
ablackrat wrote: | The material is a retro reflective product from 3M. I can find the exact produce code if you're interested. I had them done by a local company that does our job bikes and still had the design from when we had K1100. The company is http://www.bluelite.co.uk/ |
I would be interested and most appreciative!
Cheers
Bill _________________ '02 - GL1800
The desired effect is what you get when you improve your interplanetary funksmanship - George Clinton |
|
Back to top |
|
|
|