K11 Owners Group

gladstone · Posted: Sat May 14, 2011 4:44 pm Post subject: Centre stand removal

Hi,

I need to remove my centre/side stand bracket to replace the cut-out switch and also to remove the spacers. I started to undo one of the bolts and it was very stiff, even after the initial movement.

Is this normal (ie are they thread-locked?) or am I about to shear the bolt?

Thanks in advance.

PS - any great suggestions about how to support the bike while I remove it? My friend holding the bike up was getting bored, and he may have to hold it for a while if I shear all the bolts!
_________________
1993 K1100LT (x2!)
1998 R1100R - gone
1994 R1100GS - gone
1990 K100RS 16V - gone

Saltcreek · Posted: Sat May 14, 2011 5:04 pm Post subject:

What was your plan if it came off easy?
_________________
Jim

1994 K1100LT Mystic Red, bfd, 37000 miles, sold Sad

2009 Wilderness Systems Zephyr 155 ST
2002 Litespeed titanium

gladstone · Posted: Sat May 14, 2011 5:15 pm Post subject:

Whip out the spacers, replace the switch, bolt back on, then send the bored friend home. Figured it was only four bolts, 30 mins max...
_________________
1993 K1100LT (x2!)
1998 R1100R - gone
1994 R1100GS - gone
1990 K100RS 16V - gone

Scott_Anderson · Posted: Sat May 14, 2011 5:54 pm Post subject:

The bolts are "supposed" to be a one time use bolt, but many have reused them with no issues. Yes there is some thread resistance to prevent them from working themsleves loose. I have used some thread locker when reinstalling them.
_________________
Ride safe.

1997 K1100LT 0302488
2017 FLHTK Ultra Limited
Garmin StreetPilot 2820
Garmin Zumo 550
Garmin Zumo XT
"One who does not ask questions is ashamed to learn" Danish proverb
1995 K1100LT 0302044(R.I.P.)
1997 R1100RT ZC62149(sold)

hfxrzw · Mad Brick Rider Joined: 30 Jan 2009 Posts: 78

I normally use one of those 'cruiser stands' when I do work like that; one of those square frames with a handle. Works like a charm.
_________________
Cheers, Rene

Greetings from Florida.

BMW K100 '85