| View previous topic :: View next topic |
| Author |
Message |
Oliai
Joined: 18 Jul 2011
Posts: 3
|
 Posted: Mon Aug 29, 2011 12:21 am Post subject: Instrument support bracket |
 |
|
Looking for a good instrument support bracket for 93 K1100LT or the actual diagram so I can build one. If you have dimensions or info on the material type, thickness, etc. that will be fine too.
Thanks in advance. |
|
| Back to top |
|
 |
Rafal
Flying Brick Rider
Joined: 05 Jan 2009
Posts: 257
Location: Wroclaw, Poland
|
| Posted: Mon Aug 29, 2011 3:54 am Post subject: Re: Instrument support bracket |
|
|
| Oliai wrote: | | Looking for a good instrument support bracket for 93 K1100LT |
Hello!
One important question what and in what situation do you want to support?
Best regards,
_________________
Rafal
K1100RS is a real beast (in Marrakesh Red)
K75S is a real beauty - she has gone  , but not to far  .
 |
|
| Back to top |
|
|
lee richter
Mad Brick Rider
Joined: 05 Nov 2009
Posts: 83
Location: Orlando, FL
|
| Posted: Mon Aug 29, 2011 7:29 am Post subject: |
|
|
Where are you? I have a damaged Fairing support bracket that has an instrument pod mounting that could easily be cut off and attached to a good bracket.
_________________
Lee Richter
Orlando, FL
I like flying, HIGH or low, Wings or Not
182 Texas Tail Dragger
'39 J3 Cub
2000 HD Soft Tail Sold
2002 R1150R
1994 K1100LT |
|
| Back to top |
|
|
Oliai
Joined: 18 Jul 2011
Posts: 3
|
| Posted: Mon Aug 29, 2011 9:50 am Post subject: Re: Instrument support bracket |
|
|
I have the metal plate that has the two rubber gromets in it. Apparently there is a support plate that goes behind it and then the bolts, bushings, etc. connect the through the support bracket, middle plate and gromets on the bike, to the back of the instrument cluster. I can't believe those gomets alone are enough to secure the cluster.
I live in MI, by the way.
Thank you both for your replies. |
|
| Back to top |
|
|
lee richter
Mad Brick Rider
Joined: 05 Nov 2009
Posts: 83
Location: Orlando, FL
|
| Posted: Mon Aug 29, 2011 2:08 pm Post subject: |
|
|
I believe that what you are referring to is the vibration counter weight. That I do not have, I can send you pictures and could remove mine without much trouble. I have the fairings stripped off, in the process of painting. I believe the PN to be 62212305326. It should show in the Illustrated Parts break down Item # 1
_________________
Lee Richter
Orlando, FL
I like flying, HIGH or low, Wings or Not
182 Texas Tail Dragger
'39 J3 Cub
2000 HD Soft Tail Sold
2002 R1150R
1994 K1100LT |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
