K11 Owners Group

AUSBRICK · Posted: Sun Mar 24, 2024 10:37 pm Post subject: T P S settings

Hi all, been a long time, seems I have misplaced all my printed info . I used to set the tps via its output voltage but dont know the figures and wires to read anyone got that info . tried the search just going in circles,.. cheers AB
_________________
92k1100 lt with sidecar. 93K1100 CAFE..86K75C.95 k1100lt

AUSBRICK · Posted: Tue Mar 26, 2024 8:26 pm Post subject: Tps voltage check

Seems this sites dead , always got a quick response, any way found all my
Info luckily for anyone that needs it it's pin #1& pin#4 on the tps plug , ignition on motor not running . Voltage should be 0.375 .if not rotate tps till as close as u can get snap throttle on and off several times to make sure it's tha same . This is my go to starting point setting and then I can make very small adjustments from there with motor running. Has always worked well . My wiring has been stripped down to the bare necessity as it's a cafe so no test light flashing to analyse. Cheers AB
_________________
92k1100 lt with sidecar. 93K1100 CAFE..86K75C.95 k1100lt

Flying Duck · Posted: Tue Mar 26, 2024 9:57 pm Post subject:

https://www.k11og.org/forum/viewtopic.php?p=60092
_________________
93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE