K11 Owners Group

rover759 · Posted: Wed Jul 02, 2008 5:00 pm Post subject: radio fitment

OK here is a question- is there anyway of removing the stereo without drilling out the rivets?

Flying Duck · Posted: Wed Jul 02, 2008 5:29 pm Post subject:

See step 1 here:
http://www.ibmwr.org/ktech/rt-fairing/k75rt_fairing.shtml
_________________
93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE

Off the grid · Posted: Wed Jul 02, 2008 5:31 pm Post subject:

Out of the bike or out of the housing?

The housing is held in by 3 metal tabs, have to get in there and pop each one with an awl or mini screwdriver. It's only held in the housing by the rubber gasket.

The openings for the tabs are tiny and circular, one on the top, bottom and left side. They are about 1/8 of an inch large.
_________________
Bane of your existence since July 2006
2007 Triumph Tiger ABS. "Sabertooth"
2009 Husqvarna TE610. "The dirty Italian mistress"

Flying Duck · Posted: Wed Jul 02, 2008 5:33 pm Post subject:

The head unit itself also slides in the the DIN mounting bracket. You neew the"U" to pop it out of the DIN bracket.
_________________
93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE

rover759 · Posted: Wed Jul 02, 2008 6:30 pm Post subject:

thought that was the way...... wood and trees comes to mind!!!
Seeing as i forgot and then installed t he crud deflectors that the article carefully reminds you to install....
do you put the big bolt that holds the fairing to the frame through this or do you put the plastic cover on top of the bolt?
Thx for all your help!! Cool