View previous topic :: View next topic |
Author |
Message |
Flying Duck PsyKotic Waterfowl
Joined: 27 Jan 2005 Posts: 10088 Location: Bumf***, WA
|
Posted: Mon Oct 26, 2009 8:03 pm Post subject: K bike clutches |
|
|
How they work
How to adjust them
How to replace the clutch plate and/or O-ring
see here: http://tinyurl.com/fdkclutch _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
Back to top |
|
|
Phil Marvin Rider in the Sky
Joined: 03 Apr 2003 Posts: 1389 Location: El Paso, Texas, USA
|
Posted: Mon Oct 26, 2009 10:51 pm Post subject: |
|
|
Hi, Drake,
On the page of the manual showing how to adjust the clutch, there is a typical error. The dimension "A" is given as 4.0mm +/- 0.5mm (1.5748in +/- 0.1968in). The decimal point got moved in the translation. The correct dimension in inches should be 0.15748in +/- 0.01968in. _________________ Ride Safe,
Phil Marvin in El Paso, TX
'94 K75A/3
'95 K75RTP |
|
Back to top |
|
|
Flying Duck PsyKotic Waterfowl
Joined: 27 Jan 2005 Posts: 10088 Location: Bumf***, WA
|
Posted: Tue Oct 27, 2009 10:39 am Post subject: |
|
|
Phil Marvin wrote: | Hi, Drake,
On the page of the manual showing how to adjust the clutch, there is a typical error. The dimension "A" is given as 4.0mm +/- 0.5mm (1.5748in +/- 0.1968in). The decimal point got moved in the translation. The correct dimension in inches should be 0.15748in +/- 0.01968in. |
I use the mm dimensions and never noticed that. It'd be pretty dang hard to get a 1.6" gap in the clutch lever.
Thanks. I did some graphic manipulation so it is now correct. (Once I get FrontPage to upload it. Grrr....) _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
Back to top |
|
|
whyoldbill Flying Brick Rider
Joined: 12 Jun 2006 Posts: 440 Location: in the boonies, northwest of Columbus, Ohio
|
Posted: Thu Mar 11, 2010 11:45 am Post subject: K bike clutches |
|
|
Duck,
Very nice write up! Hats off to you ! If you're ever in the Central Ohio area, please get in touch. Dinner's on me!
Bill _________________ '02 - GL1800
The desired effect is what you get when you improve your interplanetary funksmanship - George Clinton |
|
Back to top |
|
|
Flying Duck PsyKotic Waterfowl
Joined: 27 Jan 2005 Posts: 10088 Location: Bumf***, WA
|
Posted: Thu Mar 11, 2010 2:07 pm Post subject: |
|
|
Thanks. Not sure if I'll ever be in Ohio again(been there a few times in the past) but you never know. _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
Back to top |
|
|
|