| View previous topic :: View next topic |
| Author |
Message |
carp
Flying Brick Rider
Joined: 09 Jan 2009
Posts: 159
Location: Minnesota
|
 Posted: Sun Jan 09, 2011 5:10 pm Post subject: Beige comfort seat, can't figure it out |
 |
|
A few years ago I bought my 93 K1100LT. The PO had a corbin on it and I like the corbin. There was also a beige comfort seat with the following number on it 2323318 0823. I can't find the Parts number on any online microfiches.
I tried it on my K75C and the bulge on the front of the seat pan goes down to far. Since I don't plan on using it I want to sell it but it would be nice to know if this was just for a 93 k1100lt or if it can be used on other k bikes.
Saw somewhere on the internet that one guy cut the bulge off, exposing the foam to make it fit on a number of k bikes. Can anyone share their wisdom on this seat. Its in perfect condition. What bikes will it work for as it is?
http://picasaweb.google.com/carp4u/20110109?feat=directlink
_________________
93 K1100LT
07 Bandit 1250S
Last edited by carp on Sun Jan 09, 2011 6:04 pm; edited 1 time in total |
|
| Back to top |
|
 |
carp
Flying Brick Rider
Joined: 09 Jan 2009
Posts: 159
Location: Minnesota
|
|
| Back to top |
|
|
RAL88
Flying Brick Rider
Joined: 28 Apr 2004
Posts: 736
Location: New Mexico Land of Enchantment and 365 days of riding USA
|
| Posted: Sun Jan 09, 2011 7:50 pm Post subject: |
|
|
If your talking about the big bulge on the bottom that only fits on ABS I bikes. I had two seats. One like yours and the one that fits on the ABS II bikes. I liked the seat on the ABS I seat so I switched the seats on the pans and trimmed the foam so it would fit in the smaller bulge ABS II pan. You could cut the bulge out but you would probably lose some of the side to side stiffness of the seat though the bulge does not sit on anything and doesn't support your weight.
_________________
Rich
"If it ain't broke, take it apart and make it work better"
*************
'96' K1100LT-SE
'97' R850GS-R |
|
| Back to top |
|
|
Flying Duck
PsyKotic Waterfowl
Joined: 27 Jan 2005
Posts: 10100
Location: Bumf***, WA
|
| Posted: Sun Jan 09, 2011 9:06 pm Post subject: |
|
|
You CAN fit it on the K75C. I have a Mayer seat with that same OEM seat pan on my K75F. However you need to use an L-Jetronic tray for a low seat model and you give up the under seat storage. PM me if you want a low seat brain holder. I've got a spare.
_________________
93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
| Back to top |
|
|
carp
Flying Brick Rider
Joined: 09 Jan 2009
Posts: 159
Location: Minnesota
|
| Posted: Sun Jan 09, 2011 9:35 pm Post subject: |
|
|
Does the k75 low seat brain holder go between the fender and the battery?
_________________
93 K1100LT
07 Bandit 1250S |
|
| Back to top |
|
|
Flying Duck
PsyKotic Waterfowl
Joined: 27 Jan 2005
Posts: 10100
Location: Bumf***, WA
|
| Posted: Sun Jan 09, 2011 9:51 pm Post subject: |
|
|
| carp wrote: | | Does the k75 low seat brain holder go between the fender and the battery? |
No. It's essentially the same as the regular seat one but without the storage box.
I'll be back home later this week and can take a pic of my K75.
_________________
93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
