| View previous topic :: View next topic |
| Author |
Message |
blue95lt Flying Brick Rider
Joined: 21 Mar 2007 Posts: 230 Location: Franklin In.
|
Posted: Thu Jan 21, 2010 10:11 pm Post subject: 95 K1100lt Wiring gurus |
|
|
Hi Duck or Phill
I know I pulled a dumb trick on myself.
I was rehabing my switches and didnt write down where they go!!
On a 95 k1100lt 4 way flasher switch I have 2 wires a yellow/violet and a brown.
The switch has a contact in the center,#2 and one at the end,#1 and I dont remember what wire goes to what # terminal
I've looked in my book and on the cd but still can't seem to figure it out?
Can someone help,please.thanks Keith |
|
| Back to top |
|
 |
Flying Duck PsyKotic Waterfowl

Joined: 27 Jan 2005 Posts: 10102 Location: Bumf***, WA
|
Posted: Thu Jan 21, 2010 10:36 pm Post subject: |
|
|
Yellow/violet - center switch terminal
Brown - top switch terminal
(It really doesn't matter. All the switch does is complete a ground circuit to tell the flasher relay to turn on the hazards. If you reversed them it would just complete the same circuit.) _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
| Back to top |
|
 |
blue95lt Flying Brick Rider
Joined: 21 Mar 2007 Posts: 230 Location: Franklin In.
|
Posted: Fri Jan 22, 2010 12:08 am Post subject: what wire what term. |
|
|
| Thanks Duck, I wasn't sure if it did matter,know that k bike wiring is so strange thanks again Keith |
|
| Back to top |
|
 |
|