| View previous topic :: View next topic |
| Author |
Message |
blue95lt Flying Brick Rider
Joined: 21 Mar 2007 Posts: 230 Location: Franklin In.
|
Posted: Tue Nov 23, 2010 12:22 am Post subject: Ford 3.0 |
|
|
I know guys,but u may have helpful
info.
Does any 1 have any exprnc wth a 2004 ford 3.0 that leaks
antifreze fm L. side up where head meets block or fm timing
chain cover in that area.as viewed in ft of vehicle facing
engine? thx.keith (blue95lt).
I know it ain't a k but u guys are a host of info! _________________ 1995 k1100lt daily ride(22953)when I got it
1982 cb650sc blue nighthawk (38000)(crashed)
1974 kz400(sold to get nighthawk) |
|
| Back to top |
|
 |
RJTrucker Flying Brick Rider
Joined: 31 Mar 2008 Posts: 234 Location: Central NJ
|
Posted: Tue Nov 23, 2010 10:40 am Post subject: |
|
|
sounds like it might be a head gasket. Or a cracked head. _________________ Ron
1993 K11LT
1985 K100RS with over 100K on it
1985 K100RS Luftmiester Turbo Work in progress (any help is appreciated)
1974 R90/6 |
|
| Back to top |
|
 |
whyoldbill Flying Brick Rider
Joined: 12 Jun 2006 Posts: 440 Location: in the boonies, northwest of Columbus, Ohio
|
Posted: Tue Nov 23, 2010 12:25 pm Post subject: |
|
|
I know it's not the same engine, but my Ranger has the 4.0 V6 and the antifreeze leak I had (looked like it was coming from the head gasket) was actually from the intake manifold gasket at the rear of the engine.
FWIW, I cleaned the grease and oil off the engine and used a light dusting of talcum powder to pinpoint the leak... _________________ '02 - GL1800
The desired effect is what you get when you improve your interplanetary funksmanship - George Clinton |
|
| Back to top |
|
 |
|