K11 Owners Group

Testing the front ABS is mentally intimidating but it's not very dangerous as the whole point of ABS is to keep the tire from washing out.

Just get the bike going maybe 25 MPH going straight on fla ...

If your front brake is locking then it may be that a line has broken down internally and is clogging things. A failed or too much gap ABS sensor won't cause that to happen.

It may be time for a ref ...

https://www.kbikeparts.com/classickbikes.com/ckb.tech/0.ckb.tech.files/dashswitch/dashswitch.htm

I bought a set of three used switches on Ebay from the southeast US many years ago. When I got them ...

I've run Bridgestone T32s for years on all of my Ks (including my K1600GT) and swear by them. Was a PR fan before that.

I was in Idaho a few years go when my K1100LT tread got low and the only tire ...

Nice thorough review. Very interesting.

I tried a few frequency generator apps and like this one because it's free and allows keypad entry of a digital frequency.

https://www.kbikeparts.com/classickbikes.com/ckb.tech/0.ckb.tech.files/spe ...

That's a weird pre-sock with the attachment in the middle. The factory one has it at the end. I don't see how the middle attachment one would ever work well in a K tank.

Did you get fuel pumps 2 & 3 from the same source? If so, stop using that source.

Just because it comes from Europe doesn't mean that it's good. Think Triumph TR7 or anything Fiat.

The side stand switch can be finicky. I had an issue with that on one of my K1100s. I solved the issue by putting a short piece of vacuum hose on the tang the pushes on the side stand switch to make s ...

It's a bracket that supports the exhaust on the right side of the square box part of the exhaust.

You won't crash if you ride without it.

Another site worth checking out is https://www.tills.de/ (Germany)

I use Motobins(UK) a lot. I don't know what the weight limit is but if they don't use FedEx then they send via Royal Mail/USPS so the shipping cost is reasonable on top of their good prices. Another r ...

Troubleshoot:
http://www.kbikeparts.com/classickbikes.com/ckb.tech/0.ckb.tech.files/bmu/bmu.htm

Could be dirt in the seal:

https://www.youtube.com/watch?v=3RXBcN8TZBA

Look here:
https://www.kbikeparts.com/classickbikes.com/ckb.tech/0.ckb.tech.files/leftcombosw/leftcombosw.htm

Rich! How are you?

The last 2 fuel pumps I got came from EME - reasonably priced - and probably a lot better than Chineseium...

Where do you think the EME ones come from?

Hint: Large nat ...

https://www.aliexpress.us/item/2251832627396462.html

The fuel pressure regulator keeps the right pressure at the fuel rail.

It's probably "easiest" to do if you remove the exhaust.

Take a picture of it before you disassemble. Will make reassembly easier.

To detach and attach the springs loop a piece of wire ...

Removing the side stand switch won't change the lean angle.

Those silver plates that rotate around up at the side stand pivot do more than trigger the side stand switch. They also control the sprin ...

https://www.bridgestonemotorcycletires.com/en-us/promotions/spring-2024-promotion-us