K11 Owners Group

andyc · Posted: Sun May 18, 2008 10:41 am Post subject: trans oil leak

Did my annual trans and final drive oil changes last weekend. Shortly afterward, there is a steady flow of oil from the bellhousing. Pulled the trans. Oil is coming from the inside of the trans shaft along the clutch pushrod. Which part at the back of the trans is the actual seal to the inside? I do not see anything listed as a seal on the fiche.

Thanks
Andy
_________________
93 RS

Flying Duck · Posted: Sun May 18, 2008 8:27 pm Post subject:

I replaced mine last year. Can't remember where I got the part number.

It's a bitch to remove. Tough to get back in as well. I ruined the first one. Used an appropriately sized socket to drive in the second one.
_________________
93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE

Flying Duck · Posted: Mon May 19, 2008 5:12 pm Post subject:

Found my receipt: Part number is 23211451159 - SEAL RING 9x15x4. It shows up on the fiche/ETK on the 23_0273 diagram.
_________________
93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE

andyc · Posted: Tue May 20, 2008 12:48 pm Post subject:

Great, thanks
_________________
93 RS