| View previous topic :: View next topic |
| Author |
Message |
storch Brick Rider
Joined: 11 May 2010 Posts: 29 Location: Nanaimo,BC
|
Posted: Tue May 11, 2010 5:43 pm Post subject: sidecar attachments |
|
|
I just bought a K 1100 and want to attach a sidecar to it.Does anybody
have piotures of the attachments to the frame,especially the upper forward mount? |
|
| Back to top |
|
 |
Saltcreek Flying Brick Rider

Joined: 22 Oct 2008 Posts: 957 Location: New Hampshire
|
Posted: Tue May 11, 2010 9:31 pm Post subject: |
|
|
Welcome to the forum, be patient I am pretty sure there is a sidecar guy here. _________________ Jim
1994 K1100LT Mystic Red, bfd, 37000 miles, sold
2009 Wilderness Systems Zephyr 155 ST
2002 Litespeed titanium |
|
| Back to top |
|
 |
whyoldbill Flying Brick Rider
Joined: 12 Jun 2006 Posts: 440 Location: in the boonies, northwest of Columbus, Ohio
|
Posted: Tue May 11, 2010 10:50 pm Post subject: |
|
|
Welcome!
Having had a Velorex mounted on an '82 Goldwing, I love sidecars.
The only one I could bring myself to mount on a curve-loving machine like the K1100, would be this one -> http://bmwmotorcycletech.info/flexit.htm
I have seen a few K's with hacks mounted, but nothing that looked "right", if you know what I mean.
Not to say that it hasn't been done, I just have not seen it in my limited exposure to K-bikes.
Bill _________________ '02 - GL1800
The desired effect is what you get when you improve your interplanetary funksmanship - George Clinton |
|
| Back to top |
|
 |
michaelcurrin Flying Brick Rider
Joined: 01 Jun 2003 Posts: 329 Location: eastern NC
|
Posted: Wed May 12, 2010 8:42 am Post subject: |
|
|
Storch,
Here's a link to an article about my K1100RS / EML Speed 2000
http://hpsidecars.com/Projects/MikeCurrin/A%20Little%20More%20on%20the%20Side1.pdf
You are most likely going to have to come up with a sub frame of some kind. There's not really anything to attach to on the lower front.
My rig uses a subframe that ties into the steering head, front motor mounts, the transmisson mounts, and where the center stand used to be. The sidecar then attches to the subframe and the rear section of the K bike frame. The subframe originally came from EML but has had a few "enhancements"
What sidecar are you looking at? Many of the siecar manufacturers have subfframes for various models.
If you're looking for a more performance based set up you could find some information here
http://hpsidecars.com/
Or for just general sidecar info
http://www.sidecar.com/
Both have links to maufacturers and dealers
Here's some more pictures of my rig that show the subframe a little better
http://hpsidecars.com/forum/viewtopic.php?t=313&highlight=
Mike _________________ Mike Currin
20 BMW R1250RS
93 BMW K1100RS / EML Speed 2000
06 Ducati ST3
67 Triumph 650 chopper |
|
| Back to top |
|
 |
storch Brick Rider
Joined: 11 May 2010 Posts: 29 Location: Nanaimo,BC
|
Posted: Wed May 12, 2010 3:44 pm Post subject: sidecar |
|
|
Thanks for reply.I was interested how the upper forward attachment looked like.I am building my own sidecar and make my own attachments.
Right now I have a FJ 1100 with homebuilt sidecar.Want to see how the K bike compares.Have been in sidecars since 1952.- There are some pictures of my sidecars in the united sidecar association pictures,also in Adventure rider hacks. |
|
| Back to top |
|
 |
BB Brick Rider

Joined: 14 Apr 2009 Posts: 36 Location: Willamette Valley USA
|
|
| Back to top |
|
 |
Scott_Anderson Site Admin
Joined: 05 Sep 2006 Posts: 3122 Location: Central Iowa, USA
|
Posted: Wed May 12, 2010 10:04 pm Post subject: |
|
|
Here's another site.
http://www.flyingbrick.de/board/portal.php?lang=en
Look for "SidecarJohn". You should be able to e-mail him for tips/advice. _________________ Ride safe.
1995 K1100LT 0302044
2017 FLHTK Ultra Limited
Garmin StreetPilot 2820
Garmin Zumo 550
Garmin Zumo XT
"One who does not ask questions is ashamed to learn" Danish proverb
1997 K1100LT 0302488(R.I.P.)
1997 R1100RT ZC62149(sold) |
|
| Back to top |
|
 |
jimbenge Brick Rider
Joined: 04 Dec 2006 Posts: 43 Location: san diego ca
|
Posted: Wed May 19, 2010 1:37 am Post subject: sidecar mount |
|
|
If you are building your own sub-frame that would suffice for the lower mounts. I have an 1985 EML on a K100 and the front upper mount is connected to the lower engine bolt via a threaded piece of hex stock.
Good Luck...... _________________ Jim Benge, San Diego, CA.
1995 K1100LT
1993 K1100RS & Getaway trailer
K100RT with 1985 EML sidecar & Kwik-Kamp Trailer
2006 Harley 1200R Sportster |
|
| Back to top |
|
 |
storch Brick Rider
Joined: 11 May 2010 Posts: 29 Location: Nanaimo,BC
|
Posted: Tue May 25, 2010 3:41 pm Post subject: |
|
|
Jim,are you using hex stock just because you have it?That is my kind of thing.I just bought 40 feet of 1.5" square tubing for $ 25.oo and I have a
lot of 1" square tubing from a plotting table project left over.-What connections do you have to the left side of the bike? |
|
| Back to top |
|
 |
|