| View previous topic :: View next topic |
| Author |
Message |
drikko
Flying Brick Rider
Joined: 20 Nov 2009
Posts: 1966
Location: Brisbane, OZ
|
 Posted: Mon Jun 07, 2010 2:11 am Post subject: DOH! There's a bit left over!! |
 |
|
This was somewhere under the right hand knee cover or up a bit further as I had the instruments and all the inside fairing panels out and the fuel tank off. Anyone know where it goes! Nothing I could see in the clymer manual......
Keys in photo to size it, and yes it's solid rubber.
_________________
K1100RS '97
Laverda RGS 1000 '84
Jim Young Trailer Sailer 5.7M WB
DISCLAIMER:- Anything I say may have been when I was drunk so please don't take it personally.
'Bigamy is having one wife/husband too many. Monogamy is the same.'
Oscar Wilde |
|
| Back to top |
|
 |
Jim
Site Admin
Joined: 17 May 2003
Posts: 3841
Location: WHERETHEFUNNEVERENDS
|
| Posted: Mon Jun 07, 2010 3:07 am Post subject: |
|
|
It's part of that heat screening thing - Scott_ just posted a picture of the whole setup in another thread. Take a look at the fiche - you'll see it there.
_________________
Jim
1997 K1100LTSE 94,000 - still has gremlins!
1995 R100RT Classic 16,650 crashed - repaired!
1992 K75RTP 46,000
"We shall not all die, but we shall all be changed." |
|
| Back to top |
|
|
Scott_Anderson
Site Admin
Joined: 05 Sep 2006
Posts: 3122
Location: Central Iowa, USA
|
| Posted: Mon Jun 07, 2010 7:09 am Post subject: |
|
|
Looking at what's left it looks like your piece is torn off from a larger part.
You should be able to fit it back in.
_________________
Ride safe.
1995 K1100LT 0302044
2017 FLHTK Ultra Limited
Garmin StreetPilot 2820
Garmin Zumo 550
Garmin Zumo XT
"One who does not ask questions is ashamed to learn" Danish proverb
1997 K1100LT 0302488(R.I.P.)
1997 R1100RT ZC62149(sold) |
|
| Back to top |
|
|
drikko
Flying Brick Rider
Joined: 20 Nov 2009
Posts: 1966
Location: Brisbane, OZ
|
| Posted: Mon Jun 07, 2010 7:44 am Post subject: |
|
|
All the surfaces are moulded ie there's no tears! I've been through the fiches but can't see it. Next time I see another K11RS I'll check it out.
There isn't a matching one on the other side that I can see!
Cheers
D
_________________
K1100RS '97
Laverda RGS 1000 '84
Jim Young Trailer Sailer 5.7M WB
DISCLAIMER:- Anything I say may have been when I was drunk so please don't take it personally.
'Bigamy is having one wife/husband too many. Monogamy is the same.'
Oscar Wilde |
|
| Back to top |
|
|
joeangi
Flying Brick Rider
Joined: 03 Apr 2006
Posts: 291
Location: Westchester, New York
|
| Posted: Mon Jun 07, 2010 12:17 pm Post subject: |
|
|
The rounded part of the molded piece fits into the bolt hole (cavity) of the crankcase cover on the right side if I remember correctly. The pointy side should slip into the fairing lower between one of the "slits"
Joe
_________________
1994 K1100RS
1986 K100RS |
|
| Back to top |
|
|
dryheat
Joined: 03 May 2008
Posts: 22
Location: Arizona
|
| Posted: Mon Jun 07, 2010 6:21 pm Post subject: |
|
|
| Quote: | There isn't a matching one on the other side that I can see!
|
The piece on the left side is larger and shaped differently. Same idea though. Only goes in one way. It may have fallen off when you removed your fairing so you posibly do not recall removing it.
_________________
Jeff
1993 K1100RS |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
