K11 Owners Group

CrashBar · Joined: 17 Feb 2008 Posts: 17 Location: Sommerville MA

Turns out my wobbly fairing is a combination of broken bracket (one of the "H" arms Plus 2 of the 4 stearing head mounting points) and the two top mounting bosses (where the upper 'H" arms joun the fairing) snapping off. 104K miles and a lot of dirt roads have taken their toll.

I've ordered an "H" from a junker on EBAY. Now I need to sort out the fairing. The breaks are pretty clean, and I want to try and epoxy them back in place.

Has anyone tried this and can you recomend an epoxy?

CB

PS - thanks for all the help on this - http://k11og.org/forum/viewtopic.php?t=8251&highlight=

4500 miles later (including Boston to Louisiana via the BRP and Natchez Trace) it is holding up great.

I'm now preparing for another shot at this trip:
http://www.advrider.com/forums/showthread.php?t=466462
which ended with a busted drive shaft U-joint. I'm trying to make sure this attempt is a success,
_________________
1993 K1100LT (116,000 miles and counting)
1973 Honda CB350F
1978 Honda CB550K
1973 Triumph TR5T

Flying Duck · Posted: Wed Jul 28, 2010 6:33 pm Post subject:

I use several layers of fiberglass on the inside. Then I let the painter guy fill and sand the external cracks.
_________________
93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE