| View previous topic :: View next topic |
| Author |
Message |
tibbe Flying Brick Rider
Joined: 14 Jul 2003 Posts: 190 Location: Lulea Sweden
|
Posted: Sun Apr 17, 2011 3:06 pm Post subject: ABS II fault above 130kmh / 80mph |
|
|
Hi
Have a mystrerious fault on my -94 K11LT ABS unit.
Can ride below 130kmh / 80 mph for ours but above that speed the ABS Warning lamps start to flash after appr 2 minutes.
Stopping and starting the bike/engine the ABS acts as normal but riding fast again the ABS fault reappear.
What can it be?
BTW. the bike has beeing standing over the winter in a cold garage, sometimes well below frezzing, with battery charger on.
BTW2. had a ABS fault last summer going from Prague to swiss where MotorObertor/Chur found no error by plugging in diagnose but could reset the unit.
Third reset worked, and no fault the rest of last year, incl. high speed touring on german autobahn. |
|
| Back to top |
|
 |
Number 6 Flying Brick Rider

Joined: 05 Feb 2011 Posts: 481 Location: Paris area, France
|
Posted: Sun Apr 17, 2011 4:18 pm Post subject: |
|
|
I had exactly the same problem, I changed the rear sensor distance closer to the ring and it is now solved. _________________ I am not a number, I am a free man.
94 K1100LT |
|
| Back to top |
|
 |
tibbe Flying Brick Rider
Joined: 14 Jul 2003 Posts: 190 Location: Lulea Sweden
|
Posted: Mon Apr 18, 2011 3:29 am Post subject: |
|
|
Hi
Thanks
Makes sence, only wrenching since last season changed the bearring between final drive and the swing some weeks ago.
This include removing the rear breakcaliper with ABS-sensor.
Will check and adjust the gap.
/Sven-Erik |
|
| Back to top |
|
 |
|