K11 Owners Group

nobu · Joined: 13 Feb 2005 Posts: 23 Location: Japan

Hello All,

Today, I tried removing ABS ring from rear disc brake carrier of my K1100LT(ABS-I '92). I could remove three screws from disc brake carrier. However I couldn't remove ABS ring from disc brake carrier.　How to remove ABS ring from disc brake carrier?
_________________
------------------------------
BMW K1100LT `92
SUZUKI Vecster 125
YAMAHA TDR80
Renault Kangoo
TOKYO JAPAN
------------------------------

Inge K. · Posted: Sun Sep 25, 2011 7:30 am Post subject:

Try to apply some heat to the ring.

Inge K.

nobu · Joined: 13 Feb 2005 Posts: 23 Location: Japan

Thanks Inge K.

I will try it this week end.
_________________
------------------------------
BMW K1100LT `92
SUZUKI Vecster 125
YAMAHA TDR80
Renault Kangoo
TOKYO JAPAN
------------------------------

nobu · Joined: 13 Feb 2005 Posts: 23 Location: Japan

Last Saturday, I tried removing with tire lever after heating ABS ring.
But, the ABS ring not move at all.

What tools should I use to remove ABS ring after heating?
For example gear puller...
_________________
------------------------------
BMW K1100LT `92
SUZUKI Vecster 125
YAMAHA TDR80
Renault Kangoo
TOKYO JAPAN
------------------------------

nobu · Joined: 13 Feb 2005 Posts: 23 Location: Japan

Last Saturday, I could remove ABS ring from rear rotor with cheaper gear
puller (200mm) .

Thanks.
_________________
------------------------------
BMW K1100LT `92
SUZUKI Vecster 125
YAMAHA TDR80
Renault Kangoo
TOKYO JAPAN
------------------------------

Inge K. · Posted: Sun Oct 09, 2011 11:13 pm Post subject:

Nice to see that you finaly get it sorted out, good work done.

Inge K.

robert85 · Joined: 25 Oct 2011 Posts: 22

I don't know of a good way other then a press and hoping they don't break. I think I would check with the dealer and see if you can get them. But I pretty sure they will break coming of unless someboby else has trick way of getting them off.