| View previous topic :: View next topic |
| Author |
Message |
Adrian Mad Brick Rider

Joined: 17 Aug 2007 Posts: 98 Location: Weston super Mare, Somerset, UK
|
Posted: Sat May 09, 2009 1:22 pm Post subject: Autocom intercom power source |
|
|
I've just bought a 2nd hand autocom rider to pillion unit for out trip this summer. It needs to be powered from the bike's electrics, where would be the best place to connect so that it's only live with the ignition on? By the look of the leads which are quite short maybe somewhere near the battery?
Cheers
Adrian _________________ Adrian in Somerset, UK
K1100LT SE
145,000 miles and counting
https://sites.google.com/site/worlestone/ |
|
| Back to top |
|
 |
Flying Duck PsyKotic Waterfowl

Joined: 27 Jan 2005 Posts: 10102 Location: Bumf***, WA
|
Posted: Sat May 09, 2009 1:29 pm Post subject: |
|
|
Look for an unused round white connector in the relay box. One of the wires on that is switched and should work fine for your needs. (The white connector is for the BMW add-on alarm.) _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
| Back to top |
|
 |
old guy old bike Flying Brick Rider
Joined: 18 Jul 2007 Posts: 373 Location: Lisbon, OH
|
Posted: Sat May 09, 2009 6:15 pm Post subject: |
|
|
+1 on the alarm connector. That's were I tapped in my Starcom. Originally had it in my tank bag but got tired of all the wires and such. I have it mounted under the seat now with the helmet connectors coming out the side. Went to Radio Scrap and bought a 3.5mm patch cord with a 90° connector to run from the stereo to the Starcom. Now I can listen to my tunes without removing the cover over the radio. _________________ 1993 K1100LT
2003 K1200GT Gone but not forgotten
2014 Victory Crossraods |
|
| Back to top |
|
 |
chrisk1100rs Big Brick Rider
Joined: 31 Dec 2008 Posts: 63 Location: Isle of Man
|
Posted: Mon May 11, 2009 2:09 am Post subject: Autocom |
|
|
Adrian
My autocom was conected for me by the dealer 14 years ago to the tail light feed
Chrisk1100rs _________________ Stelth |
|
| Back to top |
|
 |
PHIL1601UK Big Brick Rider

Joined: 01 May 2007 Posts: 64 Location: Bristol, UK
|
Posted: Tue May 12, 2009 6:38 pm Post subject: |
|
|
Hi Adrian,
Tapped mine into the brake light switch wire - or you could take a feed from the Starter motor relay - but better to save that in case you need to fit a relay for later on, something like extra lights for example.
phil. _________________
1996 Aspen Silver K1100LTSE - acquired 23/03/07 |
|
| Back to top |
|
 |
Adrian Mad Brick Rider

Joined: 17 Aug 2007 Posts: 98 Location: Weston super Mare, Somerset, UK
|
Posted: Tue May 19, 2009 5:04 pm Post subject: |
|
|
Thanks all, I chose the tail light feed and all seems to be well.
Adrian _________________ Adrian in Somerset, UK
K1100LT SE
145,000 miles and counting
https://sites.google.com/site/worlestone/ |
|
| Back to top |
|
 |
|