| View previous topic :: View next topic |
| Author |
Message |
Kenji
Joined: 06 Nov 2009 Posts: 18 Location: Oakland, CA
|
Posted: Fri Nov 06, 2009 1:45 pm Post subject: Front Wheel Removal Question |
|
|
With my 1996 K1100RS on its centerstand, will the bike "sit back" onto its rear wheel when I remove the front wheel, or will I have to support the bike via a jack? I searched this forum but I couldn't find the answer. Thanks. _________________ Kenji
1996 K1100RS |
|
| Back to top |
|
 |
BMGraeme Flying Brick Rider
Joined: 14 Mar 2006 Posts: 373 Location: Marlborough, United Kingdom
|
Posted: Fri Nov 06, 2009 2:04 pm Post subject: |
|
|
Without loaded panniers the bike will need to be jacked up under the sump. _________________ 1980 CB900FA
1994 K1100RS
2008 R1200GSA |
|
| Back to top |
|
 |
RJTrucker Flying Brick Rider
Joined: 31 Mar 2008 Posts: 234 Location: Central NJ
|
Posted: Fri Nov 06, 2009 2:10 pm Post subject: |
|
|
You must support the bike. I place a floor jack under the front of the motor and it holds it fine. I put a small block of wood wrapped in a towel on the jack so as to not leave marks on the pan. Asuming there is not belly pan on the bike. _________________ Ron
1993 K11LT
1985 K100RS with over 100K on it
1985 K100RS Luftmiester Turbo Work in progress (any help is appreciated)
1974 R90/6 |
|
| Back to top |
|
 |
Flying Duck PsyKotic Waterfowl

Joined: 27 Jan 2005 Posts: 10102 Location: Bumf***, WA
|
Posted: Fri Nov 06, 2009 2:17 pm Post subject: |
|
|
Once you've removed the belly pan you can also just have someone push down on the rear and support the front at the oil sump with phone books, blocks of wood, whatever. _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
| Back to top |
|
 |
Kenji
Joined: 06 Nov 2009 Posts: 18 Location: Oakland, CA
|
Posted: Fri Nov 06, 2009 2:37 pm Post subject: |
|
|
Thanks for the replies. I just didn't want to remove the belly pan if I didn't have to. Thanks again. _________________ Kenji
1996 K1100RS |
|
| Back to top |
|
 |
Scott_Anderson Site Admin
Joined: 05 Sep 2006 Posts: 3122 Location: Central Iowa, USA
|
Posted: Fri Nov 06, 2009 7:59 pm Post subject: |
|
|
Well if you have someone hold the back(or sit on it) long enough to remove the wheel put your blocking under the forks when your done and you won't have to mess with the belly pan. _________________ Ride safe.
1995 K1100LT 0302044
2017 FLHTK Ultra Limited
Garmin StreetPilot 2820
Garmin Zumo 550
Garmin Zumo XT
"One who does not ask questions is ashamed to learn" Danish proverb
1997 K1100LT 0302488(R.I.P.)
1997 R1100RT ZC62149(sold) |
|
| Back to top |
|
 |
|