| View previous topic :: View next topic |
| Author |
Message |
Ted Site Admin

Joined: 03 Apr 2003 Posts: 1117 Location: Further
|
Posted: Wed Jun 09, 2010 6:09 pm Post subject: ABS-1 Tester - Electronic Junkies? |
|
|
Hi Folks,
In looking at the IBMWR Tech Pages on how to build an LED light to test the ABS-1 system the (1999) directions call for an 2.7v LED, resistors, and a bunch of other things I know nothing about.
I printed it out and stopped by a Radio Shack today and while gazing cluelessly at the drawers of electronic doo-dads I started talking with a fellow who looked at the schema, laughed and said that LEDs have come a long way in ten years and all I needed was this:
Any thoughts??? I paid under $3 for it
Ted _________________
Ted
KOG#1 |
|
| Back to top |
|
 |
Ted Site Admin

Joined: 03 Apr 2003 Posts: 1117 Location: Further
|
Posted: Wed Jun 09, 2010 6:28 pm Post subject: |
|
|
Scratch that - this is the one I got:
I also bought a couple little alligator clips and was planning on soldering one for the negative side. The positive side I was just going to tin, I figure it will work just fine that way in the diagnostic port.
My thinking was to put this and a length of wire (again tinned on one end and alligator soldered to the other) into a little zip-loc baggie and have an instant ABS fault code reader/reset kit that will fit in the far recesses of the tail cowl hoping I never need it! _________________
Ted
KOG#1 |
|
| Back to top |
|
 |
Scott_Anderson Site Admin
Joined: 05 Sep 2006 Posts: 3127 Location: Central Iowa, USA
|
Posted: Wed Jun 09, 2010 8:38 pm Post subject: |
|
|
Ted, can't you do the same thing with the existing "choke" lamp on the inst cluster?
I seem to remember reading something about diagnostics on the older jetronic systems using the inst cluster lamps, but don't remember details. _________________ Ride safe.
1997 K1100LT 0302488
2017 FLHTK Ultra Limited
Garmin StreetPilot 2820
Garmin Zumo 550
Garmin Zumo XT
"One who does not ask questions is ashamed to learn" Danish proverb
1995 K1100LT 0302044(R.I.P.)
1997 R1100RT ZC62149(sold) |
|
| Back to top |
|
 |
Flying Duck PsyKotic Waterfowl

Joined: 27 Jan 2005 Posts: 10102 Location: Bumf***, WA
|
Posted: Wed Jun 09, 2010 9:34 pm Post subject: |
|
|
Not on a K75. The choke like is triggered by a piston switch next to the TPS. BMW got cheap and stopped installing the choke light switch in 91. _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
| Back to top |
|
 |
drikko Flying Brick Rider
Joined: 20 Nov 2009 Posts: 1966 Location: Brisbane, OZ
|
Posted: Wed Jun 09, 2010 9:55 pm Post subject: |
|
|
So to answer your actual question Ted, yep, that will work just fine  _________________ K1100RS '97
Laverda RGS 1000 '84
Jim Young Trailer Sailer 5.7M WB
DISCLAIMER:- Anything I say may have been when I was drunk so please don't take it personally.
'Bigamy is having one wife/husband too many. Monogamy is the same.'
Oscar Wilde |
|
| Back to top |
|
 |
bmwmick Flying Brick Rider

Joined: 07 Jun 2003 Posts: 907 Location: Tucson, AZ
|
Posted: Thu Jun 24, 2010 9:53 am Post subject: Re: ABS-1 Tester - Electronic Junkies? |
|
|
| Ted wrote: | Hi Folks,
In looking at the IBMWR Tech Pages on how to build an LED light to test the ABS-1 system the (1999) directions call for an 2.7v LED, resistors, and a bunch of other things I know nothing about.
Any thoughts??? I paid under $3 for it
Ted |
Ted,
That is the same P/N that I included in my Motronic/ABS thread back in March 2006 http://k11og.org/forum/viewtopic.php?t=2110
Mick _________________ Mick McKinnon
KOG#175
'93 K1100LT, '96 R1100RT, '84 R100RS, 2010 Kawasaki C-14
Tucson, AZ |
|
| Back to top |
|
 |
Ted Site Admin

Joined: 03 Apr 2003 Posts: 1117 Location: Further
|
Posted: Thu Jun 24, 2010 10:16 am Post subject: |
|
|
LoL - so it is!!! I guess I don't need to test it to see if it works  _________________
Ted
KOG#1 |
|
| Back to top |
|
 |
|