K11 Owners Group Forum Index K11 Owners Group
K11 Owners Group
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Race tech .9kg fork springs

 
Post new topic   Reply to topic    K11 Owners Group Forum Index -> For Sale
View previous topic :: View next topic  
Author Message
samandkimberly
Brick Rider


Joined: 28 Oct 2012
Posts: 47
Location: Near Boston, MA

PostPosted: Thu Mar 13, 2014 9:56 pm    Post subject: Race tech .9kg fork springs Reply with quote

I just put these in my K11 last spring. They're a great improvement over the stock ones, but not enough rate for me and my sidecar, so I've ordered bigger ones. These are like new, and will come with machined spacers that go on the end of the dampers so that the bigger Racetech spring clears everything nicely, and a second machined bit made so that the plastic spacer tube remains centered - the Racetech washer solution leaves a lot to be desired. I can cut the spacer tube pretty close to your requirements, so this will be close to a drop in replacement for your stock springs.

Racetech recommends this rate for a 195-205 lb solo rider, give or take.

$120 delivered in the US.
_________________
1993 K1100rs, r80, Montesas, Morinis, Hondas, Suzukis, and an MZ
Back to top
View user's profile Send private message
samandkimberly
Brick Rider


Joined: 28 Oct 2012
Posts: 47
Location: Near Boston, MA

PostPosted: Sun Aug 10, 2014 8:47 pm    Post subject: Reply with quote

Anyone interested in these for $75, delivered in the US?
_________________
1993 K1100rs, r80, Montesas, Morinis, Hondas, Suzukis, and an MZ
Back to top
View user's profile Send private message
blue95lt
Flying Brick Rider


Joined: 21 Mar 2007
Posts: 230
Location: Franklin In.

PostPosted: Tue Aug 19, 2014 1:37 am    Post subject: 95k 11lt? Reply with quote

These springs will fit a 95k11lt? I ride a lot by myself,but the stock springs don't seem to be strong enough to hold the front up with the faring on it!?
_________________
1995 k1100lt daily ride(22953)when I got it
1982 cb650sc blue nighthawk (38000)(crashed)
1974 kz400(sold to get nighthawk)
Back to top
View user's profile Send private message Send e-mail
jpberens1994K1100RS
Flying Brick Rider


Joined: 06 Apr 2008
Posts: 784
Location: Hales Corners, WI. / Relocating to central FL.

PostPosted: Tue Aug 19, 2014 5:48 pm    Post subject: springs Reply with quote

Hey Keith!

at $75 you should buy these. YES, they should fit your LT.

The ride will be sweet!

Be prepared to take apart the WHOLE fork leg and CLEAN everything out.
_________________
1993 K1100RS that I'd rather be riding FAST!
2014 Moto Guzzi Norge
Back to top
View user's profile Send private message Send e-mail
blue95lt
Flying Brick Rider


Joined: 21 Mar 2007
Posts: 230
Location: Franklin In.

PostPosted: Tue Aug 19, 2014 10:50 pm    Post subject: Fit a 93 & a 95? Reply with quote

JP
You think the guts of the forks of the 93 & 95 are the same and they will fit?
I got some springs from the Louisville stealer and hade a bike accessory dealer put them in when they did the fork seals,but they told me they didn't fit my forks?
My forks seem to need help,the bike seems to scrunch them down with the weight of the bike.
_________________
1995 k1100lt daily ride(22953)when I got it
1982 cb650sc blue nighthawk (38000)(crashed)
1974 kz400(sold to get nighthawk)
Back to top
View user's profile Send private message Send e-mail
jpberens1994K1100RS
Flying Brick Rider


Joined: 06 Apr 2008
Posts: 784
Location: Hales Corners, WI. / Relocating to central FL.

PostPosted: Wed Aug 20, 2014 9:07 am    Post subject: 93-95 fit Reply with quote

Sorry, I don;t know if they are the same.

Looking at parts fiche does not seem to help me.

Dr. Drake to the courtesy phone.

Or you could try to e-mail a couple of suppliers of teh spings.

I put mine in and it's a big improvement. Need to get the spacer just right though.
_________________
1993 K1100RS that I'd rather be riding FAST!
2014 Moto Guzzi Norge
Back to top
View user's profile Send private message Send e-mail
blue95lt
Flying Brick Rider


Joined: 21 Mar 2007
Posts: 230
Location: Franklin In.

PostPosted: Wed Aug 20, 2014 9:17 am    Post subject: Spacer? Reply with quote

How do/will I know I've got the spacer cut correctly?
If he put them in his bike,aren't the spacers already cut?
Thanks keith
_________________
1995 k1100lt daily ride(22953)when I got it
1982 cb650sc blue nighthawk (38000)(crashed)
1974 kz400(sold to get nighthawk)
Back to top
View user's profile Send private message Send e-mail
jpberens1994K1100RS
Flying Brick Rider


Joined: 06 Apr 2008
Posts: 784
Location: Hales Corners, WI. / Relocating to central FL.

PostPosted: Wed Aug 20, 2014 9:21 am    Post subject: spacers Reply with quote

YEP!!! Sounds to me like he has them cut for you already! So good to go!

I THOUGHT I had mine cut right, but now after 15,000 miles I think I need to add another 1/4" back in.

Still rides and handles just fine, only being picky.
_________________
1993 K1100RS that I'd rather be riding FAST!
2014 Moto Guzzi Norge
Back to top
View user's profile Send private message Send e-mail
blue95lt
Flying Brick Rider


Joined: 21 Mar 2007
Posts: 230
Location: Franklin In.

PostPosted: Fri Aug 22, 2014 12:28 am    Post subject: P.m. Reply with quote

Sam I sent you a pm about payment?
You do PayPal?
My info:Keith Erdman
1453 Scarlett Ct.
Franklin Indiana 46131. Thank you keith
_________________
1995 k1100lt daily ride(22953)when I got it
1982 cb650sc blue nighthawk (38000)(crashed)
1974 kz400(sold to get nighthawk)
Back to top
View user's profile Send private message Send e-mail
blue95lt
Flying Brick Rider


Joined: 21 Mar 2007
Posts: 230
Location: Franklin In.

PostPosted: Sat Aug 23, 2014 1:26 am    Post subject: Where is he? Reply with quote

JP you know this rider?
I sent a pm about payment and a post on the this site and he has not got back to me yet?
If he got rid of them, he could just say so right?
_________________
1995 k1100lt daily ride(22953)when I got it
1982 cb650sc blue nighthawk (38000)(crashed)
1974 kz400(sold to get nighthawk)
Back to top
View user's profile Send private message Send e-mail
jpberens1994K1100RS
Flying Brick Rider


Joined: 06 Apr 2008
Posts: 784
Location: Hales Corners, WI. / Relocating to central FL.

PostPosted: Sat Aug 23, 2014 6:31 am    Post subject: springs for sale Reply with quote

Nope, don't know him.

People get busy, just have ta be paitient.
_________________
1993 K1100RS that I'd rather be riding FAST!
2014 Moto Guzzi Norge
Back to top
View user's profile Send private message Send e-mail
samandkimberly
Brick Rider


Joined: 28 Oct 2012
Posts: 47
Location: Near Boston, MA

PostPosted: Sat Aug 23, 2014 9:50 pm    Post subject: Reply with quote

Sorry all - I was vacationing this week on a remote island with (gasp) no cell or internet; I'm just catching up now.

I actually don't have the original spacers I used, but I have material and tools to cut them. My notes show 5 5/8ths as the length that worked out for me; I'd recommend 5 1/2" as a pretty good guess for a 200lb rider. The only way to really do it right is twice - put them together with any spacers, measure your sag, then lengthen/shorten accordingly.

Sam
_________________
1993 K1100rs, r80, Montesas, Morinis, Hondas, Suzukis, and an MZ
Back to top
View user's profile Send private message
blue95lt
Flying Brick Rider


Joined: 21 Mar 2007
Posts: 230
Location: Franklin In.

PostPosted: Sat Aug 23, 2014 10:49 pm    Post subject: Spacers? Reply with quote

Sam do you know if you can use the stock bmw spacers?
What is the material they use? Kinda like sch.40 PVC pipe, the white drain pipe stuff?
Keith
_________________
1995 k1100lt daily ride(22953)when I got it
1982 cb650sc blue nighthawk (38000)(crashed)
1974 kz400(sold to get nighthawk)
Back to top
View user's profile Send private message Send e-mail
samandkimberly
Brick Rider


Joined: 28 Oct 2012
Posts: 47
Location: Near Boston, MA

PostPosted: Sun Aug 24, 2014 9:01 am    Post subject: Reply with quote

You could use the BMW spacers but they would be way too short. I do have a spare pair of BMW ones, so I suppose I could cut mini spacers out of them and then you could use those, and your stock spacers to get the right length. Or I'll cut a set of PVC ones for you.

And yes, Racetech uses schedule 40 PVC for theirs.

Sam
_________________
1993 K1100rs, r80, Montesas, Morinis, Hondas, Suzukis, and an MZ
Back to top
View user's profile Send private message
blue95lt
Flying Brick Rider


Joined: 21 Mar 2007
Posts: 230
Location: Franklin In.

PostPosted: Sun Aug 24, 2014 10:52 pm    Post subject: Sent u paypal Reply with quote

Sam can you send me the stock spacers and the mini spacers you can cut
to use in addition to the stock spacers to give my bike the better ride hight it needs
Thanks keith
Let me know you got the paypal ok?
_________________
1995 k1100lt daily ride(22953)when I got it
1982 cb650sc blue nighthawk (38000)(crashed)
1974 kz400(sold to get nighthawk)
Back to top
View user's profile Send private message Send e-mail
samandkimberly
Brick Rider


Joined: 28 Oct 2012
Posts: 47
Location: Near Boston, MA

PostPosted: Mon Aug 25, 2014 11:25 am    Post subject: Reply with quote

PM sent...
_________________
1993 K1100rs, r80, Montesas, Morinis, Hondas, Suzukis, and an MZ
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    K11 Owners Group Forum Index -> For Sale All times are GMT - 4 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group